The light/on&off™ system provides driving assistance but does not replace an attentive driver.
When driving in a country requiring the permanent use of headlights, please disable light/on&off™ and switch the lights on manually. Please conform to your local jurisdiction.
On vehicles equipped with mechanical controls, high beam headlights may only be switched on when the switch is already in low beam position. With light on&off, the switch must be manually set to low beam position in order to remain in high beam.
The same operation is necessary for the foglights, which are activated when the switch is set to low beam position on some vehicles.
Never dismantle, repair or alter the product. This can cause malfunctions and serious damage not only to the product but also to the vehicle.
Keep the sensor dry when cleaning the vehicle interior. Water can damage the electronic circuits and cause electric shock.
Avoid contact with chemicals and detergents, which can damage the product's surface and internal circuits.
Avoid mechanical shock, which can damage the mechanical and electronic components, resulting in permanent damage and functional deterioration.
To ensure the highest standard of performance of the system: • Keep the sensor away from liquids. • Do not manipulate the sensor once it is installed. • Do not expose the sensor or the ECU to shock. • Make sure that the windscreen is clean. • Avoid removing and replacing the sensor on the windscreen.
