The guideo™ system provides driving assistance but does not replace an attentive driver. Please take breaks during long trips.
If you feel drowsy while driving, pull over and take a rest.
Never dismantle, repair or alter the product. This can cause malfunctions and serious damage not only to the product but also to the vehicle.
Keep guideo™ dry when cleaning the vehicle interior. Water can damage the electronic circuits and cause electric shock.
Avoid contact with chemicals and detergents, which can damage the product's surface and internal circuits.
Avoid mechanical shock, which can damage the mechanical and electronic components, resulting in permanent damage and functional deterioration.
guideo™ cannot function correctly with obstacles in its field of vision. Make sure that the windscreen is clean. Similarly, make sure that there are no objects near the device, since their shadows may interfere with performance.
We advise that you systematically remove the camera module when you leave your car, to prevent the risk of theft.
Even though guideo™ operates correctly when first installed, there may be performance degradation if the position deviates from the original setting. Please ensure that guideo™ is firmly fixed and not exposed to external shock.
Regular driving on uneven surfaces will deviate the position of guideo™ and, in turn, may cause poor operation. Don't forget to check the angle of the camera at regular intervals and to adjust it if necessary.
When not using the device, avoid direct exposure to sunlight to prevent overheating. Always concentrate on your driving and be very careful when operating the remote control. Keep the remote control in a safe place. guideo™ cannot be operated without it.
guideo™ is not designed for use on snowbound roads or in heavy rain or fog. Lane Alert and Optilane may not operate as intended in these situations, and may send erroneous messages.
guideo™ is a camera-based product, and its performance is influenced by adverse light conditions, as in case of abrupt change (entering or exiting a tunnel), in case of low light (at night without street lighting) and in case of strong direct light. Use with caution in these conditions.
On roads with dark shadows or where lines are partly erased, guideo™, like the driver, will have difficulty in following the lines and may give inappropriate warnings. In these circumstances, Lane Alert and Optilane may not operate correctly and may send erroneous messages.
The Lane Alert and Optilane features start to operate after two seconds of tracking road markings. After a junction or a stretch of road with no markings, it takes two seconds for Lane Alert and Optilane to operate properly, providing appropriate alerts.
In case of bad weather, roads under construction or roads where lines have been erased, guideo™ may not recognize the road lines appropriately.
Image data may not be recorded during minor accelerations or decelerations which are insufficient to trigger the Video Box. The Video Box only begins recording when the force in any direction exceeds 0.4g.
Thick coating on the windshield glass may degrade the performance of Lane Alert, Optilane and Beep&Watch and cause dim images on the Video Box recording.
If the system emits no sound, check whether the sound level is minimized. If the sound level is low, it may not be heard against background noise. Adjust the level.
