The distance between two sensors on the rear bumper must not exceed 45cm.
The sensors' installation angle on the rear bumper must not be more than 5° off the perpendicular.
The recommended height of the rear sensors is between 45cm and 65cm above the ground.
Be careful of the brace behind vehicle bumper, which must not be pierced.
The kit cannot be used on vehicles over 9m long, because of the length of the cable.
beep&park® kit n°6 is compatible with towbars.
beep&park® kit n°6 is specially designed for long vehicles, up to 9m: light utility vehicles, estate cars and people carriers.
The screen represents the position of the obstacle detected to the rear of the vehicle: obstacle to the left or right.
We recommend that the product is installed by an approved auto technician.
The kit contains installation instructions.
